December 27

Watch and Win!


Repairing or fixing a sink’s mesh typically involves addressing issues with the sink strainer or drain basket, which can become clogged or damaged over time. Here are general steps to help you fix a sink’s mesh:

Materials and Tools:

1) Plunger
2) Bucket
3) Adjustable pliers
4) Pipe wrench
5) Screwdriver
6) Plumber’s snake or auger
7) Plumber’s tape
8) Replacement sink strainer (if needed)


Clear Debris:
Remove any visible debris or gunk from the sink strainer by using a plunger or your hands (wearing gloves). Dispose of the debris in a trash bag or bucket.

Plunge the Drain:
If the sink is still draining slowly, use a plunger to create suction and dislodge any blockages in the drain. Fill the sink with enough water to cover the plunger, place the plunger over the drain, and push and pull to create suction.

Remove the Sink Stopper:
If your sink has a stopper, remove it to access the drain. There are different types of stoppers, so consult the manufacturer’s instructions if you’re unsure how to remove it.

Check the Drain Basket:
Look at the drain basket or strainer for any visible damage or corrosion. If the mesh is damaged, it may need to be replaced.

Use a Plumber’s Snake or Auger:
If plunging doesn’t work, use a plumber’s snake or auger to reach deeper into the drain and break up or pull out any clogs. Follow the manufacturer’s instructions for the specific tool you are using.

Inspect and Tighten Connections:
Under the sink, inspect the connections between the drain pipe and the sink strainer. Tighten any loose connections using adjustable pliers or a pipe wrench.

Apply Plumber’s Tape:
If there are leaks around the connections, apply plumber’s tape to the threads before tightening them. This helps create a better seal.

Replace the Sink Strainer (if necessary):
If the sink strainer is damaged beyond repair, you may need to replace it. To do this, loosen the nut underneath the sink, remove the old strainer, and install the new one. Follow the manufacturer’s instructions for installation.
Test the Sink:

Run water in the sink to test the drainage and check for leaks. Ensure that the sink strainer is securely in place and that water flows freely down the drain.
If you encounter difficulties or if the problem persists after attempting these steps, it may be best to consult a professional plumber for further assistance. You can find professionals in your local area at where we have Professionals all over the us ready to help!

Keep in mind that plumbing issues can vary, and the specific approach may depend on the type of sink and plumbing system you have.


bargainhousenetwork, news, real estate, realestate, realestate agent, realestateagent, realtor, worldnews, worldwidenews

You may also like

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

Get in touch

0 of 350